Search

Powertech

SKU: MB3900

6/12VDC 1.5A 8-Step Intelligent Lead Acid and Lithium Battery Charger

Write a review
An intelligent battery charger to keep your batteries in peak working order. Suitable for 6V or 12V Lead Acid batteries between 4Ah - 50Ah, or 12.8V LiFeP04 from 3Ah to 25Ah. The eight charging modes keep batteries fully charged, and can also recover slightly sulfated batteries to increase battery life. Five RGB LEDs on the front panel indicate the state of charge and a push button enables you to select the appropriate charge mode. The housing can be permanently mounted using the integrated mounting holes and the IP65 weatherproof rating means it can handle a little rain. If you happen to live in areas with a cold climate, the charger can be set to provide a more effective charge in temperatures below 10°C. The charger is mains powered, terminated to battery clips on a 1.8m lead, and features short circuit, overload, incorrect polarity, reverse battery, and safety timer protection.

Battery Support:
• Sealed, Gel, AGM or Flooded Lead (6/12V, 4Ah - 50Ah)
• LiFePO4 (12.8V, 3Ah - 25Ah)

Features:
- 6V/12V dual function charger 
- Suitable for Lead Acid and LiFePO4 batteries
- 8 state intelligent charging modes
- Can recover slightly sulfated batteries

Charging Voltage: 
  Lead Acid: 7.4V/14.7V DC
  Cold/AGM: 7.4V/14.7V DC
  LiFePO4: 14.5V/4 cells

Specifications:

Dimension details Mains Cable
Length 1.8m

Length 2m
Dimensions details Charge Cable

Charger Output Voltage 7.4V,14.7V
Type of Batteries Lead Acid,Lithium Ferrous Phosphate (LiFePO4)
Reverse Polarity Protection Yes
Charger Output Current 1500mA
Additional Functions Safety Timer, Short Circuit and Overload Protection

Mains Voltage Range 240V
Mains Max Current 0.6A
Rated for AU Mains Yes
Frequency 50Hz

IP Rating IP65
Dust/Particle Ingress Protection 6 - Dust tight, no ingress of dust
Liquid/Moisture Ingress Protection 5 - Water jets

Length 175mm
Weight 640g
Width 70mm
Height 50mm

Downloads