SKU: SB1682

12V 100Ah AGM Deep Cycle Battery

Write a review

Notify me when this product is available:

This product has an absorbent glass mat embedded in the structure of the plates. (There are 6 sets of plates, each 2.0V which makes up a “battery” of plates, i.e. 12V). The mat does two things. It reinforces the lead frame of each plate, or cell, and it stops the plates from buckling under heavy discharge current). By helping make the innards of the battery virtually solid, you can mount it in any position, but it is still preferable, of course, to mount the battery upright, even for the sake of convenience of terminal access. They are an excellent product. 

Note: It is important to not discharge an AGM more than 60% between recharge.
Note: Due to excessive weight this product cannot be shipped by express or air freight and may attract a surcharge when shipped by road freight. Please contact our call centre for details.

For More info on Charging Batteries.


Width 172mm
Height 217mm
Weight 28.4kg
Length 330mm

Leakage Properties 91% charge after 3 months; 82% charge after 6 months; 64% charge after 12 months
Recharging Voltage 14.4V
Recharging Time 10hr
Standard Recharge Current 10A

DC Voltage 12V

Battery Chemical Composition Deep Cycle AGM
Battery usage Bulk Storage
Connection Type M8 Bolt/Nut
Type of battery SLA Block
20 Hour Capacity 103Ah
1 Hour Capacity 63Ah
Battery Peak Current 1500A
10 Hour Capacity 100Ah
Amp Hour Rating 100Ah
5 Hour Capacity 80Ah