10k Ohm Linear (B) Double Gang 24mm Potentiometer
or payment options selectable at checkout:
6x $1.31
4x $1.97
4x $1.97
Found a lower price? We'll match it
$5.99 Nationwide (+$3 rural)
With imperial standard shaft & bushings made to our rigid engineering specifications. They have genuine 6.35mm (1/4) shafts with a flat machined 25% of the diameter for grubscrews or interference fit knob mounting. The shaft is 38mm long. The bush is a 3/8 32 T.H.D. type which we believe is necessary for good fixing to a panel. Another important feature of the pots is their PCB mount capability. The pins are rigidly mounted on phenolic with the centre pin offset from the two outer terminals. When soldered into a PCB, the pot is quite rigidly held on its own. Double gangpots are held in 6 places and require no extra mechanical mounting assistance. The pins are large enough to terminate screened cable, etc., if the job requires hard wiring. An engineering drawing appears below. You may safely use it to design PCB artwork etc., as we have standardised this design.
Features:
- Value10K
- Power rating is 0.5W max
Potentiometer Terminal Type | Solder Legs |
Potentiometer Diameter | 24mm |
Potentiometer Gang Number | Dual gang |
Log or Linear? | Linear |
Potentiometer Knob Type | Imperial D |
Potentiometer Shaft Length | 38.5mm |
potentiometer nut size | 24mm(3/8inch 32THD) |
Pack Quantity | 1pc |
Passive mount type | Panel,Through Hole |
Passive connector type | Solder Legs |
Component package | Metal can |
Passive number of legs | 3 count |
Passive marking code | Number code |
Resistance level | 10kΩ |
Continuous Power | 0.5W |
AC Voltage rating | 150V |