Parts and Accessories

This unit comes complete with a 3V 12,000 RPM motor- . It can be stepped down (with the consequent torque multiplication) up to six times as f...

• Torque 180 g-cm• Voltage: 12VAT STALL• Torque (G.CM): 372• Current (AMP): 5.21AT MAX POWER• Output (W): 13.57• Speed (RPM): 8266• Torque (G....

Regular size square frame unit, Pull type, solder tip.Full data supplied with unit. Specifications: Weight 205g Solenoid Type Pull...

Each motor briefly described below is a quality product with hardened drive shaft, sintered bearings and quality commutator brushes etc. They ...

Ideal for hobbyist, experimenters, robotics, replacement, etc.Operating Volts: 1.5- 4.5VSize dia: 20mmSize length: 25mmShaft length: 8.1mmShaf...

Astonishing speed and power from these compact ferrite magnet types.All units feature hard steel drive shafts, long life design and are built ...

Compact reversible DC motor with gearbox head for small scale applications. Suitable for small robotics and drive applications.Operating Voltage ...

Astonishing speed and power from these compact ferrite magnet types.All units feature hard steel drive shafts, long life design and are built in ...

• Stall Torque : 1864 grams per cm • Stall Current: 23 Amps   • Max power output: 62. Watts • Max power current: 11.344 amps • Max power speed: 6...

High power reversible DC motor with gearbox head for heavy duty applications. Suitable for larger mechatronics projects or as a replacement motor...

Standard (High Power) D.C. MotorsAstonishing speed and power from these compact ferrite magnet types.All units feature hard steel drive shafts...

The set consists of a worm gear 24mm long x 12mm dia with an 8 turn worm screw. The worm has a 2.8mm axle hole which could probably be careful...

Air valve solenoid, normally closed. Air Leakage: 1cc/min max at 4 PSI Specifications: Solenoid Type Solenoid Valve AC or ...

Compact size, Push type. Full data supplied with unit. Specifications: Weight 23g Solenoid Type Push AC or...

Solid Shaft Couplers (Female)Machining from solid brass stock 16mm long, 12mm diameter. Type I will connect 2 shafts on a common axis. Type II...

This brand-new Tamiya product features an all plastic moulded gearbox and motor casing. Included is a FA-30 type 3 volt electric motor, axle w...

Similar to the unit above, but with 2 x each 50 & 25mm pulleys, 2 x 11mm pulleys, bushings, screws, nuts and 1 metre of rubber drive band....

Solid Shaft Couplers (Female)Machining from solid brass stock 16mm long, 12mm diameter. Type I will connect 2 shafts on a common axis. Type II...

Basically a double version of the unit above. Each motor can be separately driven and therefore when wheels are connected could rotate on the ...

Mid-range reversible DC motor with gearbox head for simple drivetrain applications. Ideal for driving wheels or other traction devices.Operati...

Aluminium Hub with Set ScrewsThis device will accept a 6.35mm (1/4”) shaft set screw fixed and connect to the flat face of a gear, typically t...

Supplied with one red and one black quick connect 2mm wire set. Ideally used in battery packs or any other applications where good connection is...

• Standard 48 step / 7.5° design.• Flange mount 3.0mm hardened steel shaft.Specifications:• Rated voltage: 12VDC• Rated current: 1.1A/phase• P...