SKU PS4048
10A Double GPO Power Point with In-built RCD
Original price
$73.90
-
Original price
$73.90
Original price
$73.90
$73.90
$73.90
-
$73.90
Current price
$73.90
or payment options selectable at checkout:
6x
$12.31
4x
$18.47
4x
$18.47
Found a lower price? We'll match it
$5.99 Nationwide (+$3 rural)
AVAILABLE
Nationwide delivery or pick-up FREE at Kaitaia location
(Usually takes 3-6 working days)
Designed to be a direct replacement for your standard GPO fittings, combining two standard 240AC 10A mains (GPO) outlets with a built-in RCD to provide protection against electrical shock. In the event of a fault with the connected appliance or accident, such as cutting through the mains lead, the unit will provide complete isolation from mains. A test button, status indicator, and reset button allows you to check the RCD, which we recommend should be done each time before use.
Meets Australian and New Zealand safety standards.
Please Note: This item should be installed by a licenced electrician.
Features:
- Electric shock protection
- LED status indicator
- Reset and test buttons
- Line power indicator
Specifications:
Specifications:
CD Classified: Type II
Rated Tripping Current: 30mA
Operating Speed: <40mS Max.
L/Nin-L/Nout: 2KV
Endurance: 2000 Cycles Minute
Contact Break: Double Pole
Standards: RCD Module-AS NZS 3190, Socket-AS NZS 3112
Minimum Back Box Depth: 35mm
Fixing Screws: M3.0 x 25mm
Cable Capacity: 4x2.5mm2,2x4mm2,1X6mm2
Specifications:
| Device | Socket |
| Plug or Socket Type | Mains AU/NZ 3 Pin |
| Dielectric Withstanding Voltage | 6kV |
| AC Voltage rating | 240V |
| AC Frequency | 50Hz |
| AC current rating | 20A |
| Dust/Particle Ingress Protection | 3 - Objects > 2.5mm, Tools, thick wires etc |
| Liquid/Moisture Ingress Protection | 0 - Not protected |
| IP Rating | 30 |
| Width | 120mm |
| Height | 76mm |
| Weight | 144g |
| Depth | 50mm |