10k Ohm Logarithmic (A) Double Gang 24mm Potentiometer

$5.60
SKU RP3756
Title
Resistance
With imperial standard shaft & bushings made to our rigid engineering specifications. The potentiometers are full size - 24mm diameter types . Power rating is 0.5W max. They have genuine 6.35mm (1/4) shafts with a flat machined 25% of the diameter for grubscrews or interference fit knob mounting. The shaft is a generous 38mm long. The bush is a 3/8 32 T.H.D. type which we believe is necessary for good fixing to a panel. Another important feature of the pots is their PCB mount capability. The pins are rigidly mounted on phenolic with the centre pin offset from the two outer terminals. When soldered into a PCB, the pot is quite rigidly held on its own. Double gangpots are held in 6 places and require no extra mechanical mounting assistance. The pins are large enough to terminate screened cable, etc., if the job requires hard wiring. An engineering drawing appears below. You may safely use it to design PCB artwork etc., as we have standardised this design.Value10K

Specifications:

Potentiometer Terminal Type Solder Legs
Potentiometer Diameter 24mm
Log or Linear? Logarithmic
Potentiometer Knob Type Imperial D
Potentiometer Shaft Length 38.5mm
potentiometer nut size 24mm(3/8inch 32THD)

Pack Quantity 1pc
Passive mount type Panel,Through Hole
Passive connector type Solder Legs
Component package Metal can
Passive number of legs 3 count
Passive marking code Number code

Resistance level 10kΩ

Continuous Power 0.25W

AC Voltage rating 150V